Re: 404 fire kipper
Verfasst: 04.03.2025, 21:31
Hello Leute,
I aways want to to do thinks with old parts (save the planet and recycle), so for the crank pulley I try to use an old Audi failed damper crank . I've made central hub from Alu and plan to hot press the Audi pulley. I heat the pulley at 250 deg (there was 0,15 mm oversize diameter on hub)...and it didn't press to the end, so I hammer it well...and the pulley cracked
So good bay Mehrspurig Gurt and back to the classic Gurt. And in the process I hammer my finger well too.
IMG_0298.jpg (42.45 KiB) 1629 mal betrachtet
IMG_0299.jpg (40.49 KiB) 1629 mal betrachtet
IMG_0300.jpg (48.31 KiB) 1629 mal betrachtet
I aways want to to do thinks with old parts (save the planet and recycle), so for the crank pulley I try to use an old Audi failed damper crank . I've made central hub from Alu and plan to hot press the Audi pulley. I heat the pulley at 250 deg (there was 0,15 mm oversize diameter on hub)...and it didn't press to the end, so I hammer it well...and the pulley cracked
So good bay Mehrspurig Gurt and back to the classic Gurt. And in the process I hammer my finger well too.